EVCO EVCSR338J9 - Manual (Page 21)

EVCO S.p.A. Vcolor 338 S | Installer manual ver. 1.2 | Code 144VC338SE124
page 21 of 50
8.2 Setting the cooking cycle
Operate as follows to set the cooking type:
1. Ensure that the device is switched on and that no
other procedure is in progress.
2. Touch .
3. Touch to set:
- the cooking time (2a)
- the cooking at Delta T (2b)
- the core cooking (2c).
Operate as follows to set the work set-point:
4. Touch .
5. Touch or within 15 s; see also parameters r1
and r2.
6. Touch the middle of the display.
Operate as follows to set the Delta T set-point:
7. Touch .
8. Repeat points 5. and 6.; see also parameters r7
and r8.
Operate as follows to set the humidification:
9. Touch .
10. Repeat points 5 and 6.
Operate as follows to set the duration of the phase:
11. Touch .
12. Repeat points 5 and 6.
Operate as follows to set the core set-point:
13. Touch .
14. Repeat points 5. and 6.; see also parameters r4
and r5.
Operate as follows to set the fan speed:
15. Touch .
16. Repeat points 5 and 6.
Operate as follows to set the duration of the automatic vent
opening:
17. Touch .
18. Repeat points 5 and 6.
Operate as follows to add a phase to the cooking cycle:
19. Touch .
20. Repeat the 3 points... 18.
Setting the cooking cycle.
Setting the cooking type.
Setting the work set-point.
Addition of a phase to the cooking cycle.