Kenwood TM-451A User Manual
Page 99
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
In general, the status of functions on the Display apply to
the Main Band and not the Sub-band as long as Full
Duplex is selected. That is, the status of functions
applies to the Transmit band. One exception is when
[F], [REV] is pressed. This allows you to receive on the
Main Band as indicated by the Sub-display changing to
the same frequency as the Main Band. However,
pressing [PTT] immediately restores the Sub-band
frequency on the Sub-display.
Certain functions cannot be used if Full Duplex is
activated. The following chart identifies these functions:
Non-functional
with Full
Duplex ON
Page
Ref.
Non-functional
with Full
Duplex ON
Page
Ref.
Programmable
Band Scan Limit
Select
59
Channel Display
45
Programmable
VFO Limit Select
33
Display Mode
65
92