Menu b access, Menu b configuration, Menu b access menu b configuration – Kenwood TM-451A User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MENU B ACCESS
Anytime that you want to change a function that is
controlled by Menu B, use the following procedure:
1 Press [REV] + POWER ON to enter Menu B.
• The menu and menu number selected last appears.
2 Select the desired menu function by pressing either
[MR] or [VFO].
• Press [MR] to increment Menu No., and [VFO] to
decrement Menu No.
• Microphone [MR] or [VFO] may be used if more
convenient.
MENU B CONFIGURATION
Select the desired menu selection by turning the
Tuning control or by pressing microphone [UP] or
[OWN].
• When selecting from a group of numeric menu
selections, turning the Tuning control clockwise or
pressing microphone [UP] selects in ascending
order, and turning the Tuning control
counterclockwise or microphone [DWN] selects in
descending order.
After selecting the desired menu selection, press
[SHIFT] or [TONE/CTCSS] or [REV] or [DTSS] to
exit Menu B.
Menu
No
Description
Selections
Defauit
Page
50
Remote Control Mode
OFF/ON
OFF
67
51
Automatic Page Cancel
OFF/ON
OFF
84
52
Open Page
OFF/ON
OFF
85
53
DTSS/Page Transmit Delay Time (offset/split only)
350ms/550ms
350 ms
76,83
54
Transmit Hold for 1750 Hz Tone
• TM-251E/TM-451E only
OFF/ON
OFF
53
55
Transmit Inhibit
OFF/ON
OFF
38
56
Frequency Change during Memory Recall
OFF/ON
OFF
41
57
DATA Connector Baud Rate
1200/9600
1200
93
24