Kenwood TS-440S User Manual
Ts-440s, Instruction manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- TS-440S
- CONTENTS
- 1. FEATURES
- 1. Wide dynamic range
- 2. General coverage reception from 100 kHz to 30 MHz
- 3. Automatic antenna tuner
- 4. All-mode operation
- 5. 100% continuous duty transmit
- 6. CW full break-in
- 7. Build-in XIT
- 8. Switchable IF bandwidth
- 9. Switchable AGC time constant
- 10. All mode squelch
- 11. Built-in RF power/SWR meter
- 12. Versatile frequency control
- 13. Front panel control of the TUNING dial torque is provided.
- 2. INSTALLATION
- 3. OPERATION
- 3-1. OPERATING CONTROLS
- 0 POWER switch
- (2) Meter
- MODE/KEY (Numeric Keypad)
- Indicators
- (^ Frequency display
- (D FUNCTION switches
- (j) MIC gain control
- CAR (Carrier level) control
- SQL (Squelch) control
- (0) NOTCH control
- (Q) IF SHIFT control
- ® RIT/XIT control
- RF gain control
- (Q) AF gain control
- SELECTIVITY switch
- (jj) AGC switch
- ® NOTCH switch
- PROC (Processor) switch
- (jj) F.LOCK switch
- @ UP/DOWN switches
- 1 MHz step switch
- @ TUNING dial (VFO)
- @) Program keys
- PHONES jack
- MIC jack
- @ AT TUNE switch
- @ AUTO/THRU switch
- Standby switch
- @ ALC/PWR/SWR meter switch
- @ ATT (Attenuator) switch
- NB (Noise Blanker) switch
- VOICE switch
- (T) ACC 3 terminal
- (2) AFSK IN terminal
- AFSK OUT terminal
- ® ANTI VOX control
- vox GAIN control
- @ ACC 1 jack
- (D EXT. SP (External speaker) jack
- (9) DC power connector
- KEY jack
- (Q) ANT (Antenna) connector
- ® GND (Ground) terminal
- @ ACC 2 jack
- VOX/BREAK IN switch
- (Q) REMOTE connector
- 3-2. RECEIVE
- 3-3. TRANSMIT
- 3-4. AUTOMATIC ANTENNA TUNER
- (The AT unit AT-440 is required for this function.)
- 3-5. DUAL DIGITAL VFO's
- 3-6. MEMORY
- 3-7. SCAN
- 3-9. OPERATION WITH A LINEAR AMPLIFIER
- 4. CIRCUIT DESCRIPTION
- 5. MAINTENANCE AND ADJUSTMENT
- 6. OPTIONAL ACCESSORIES
- 6-1. CRYSTAL FILTER INSTALLATION
- 6-2. VOICE SYNTHESIZER UNIT VS-1 INSTALLATION
- 6-3. INTERFACE 1C KIT IC-10 INSTALLATION
- Caution:
- 6-3-2. Operation
- ■ PS-50 HEAVY DUTY DC POWER SUPPLY
- ■ PS-430 DC POWER SUPPLY
- ■ AT-440 automatic ANTENNA TUNER UNIT
- ■ AT-250 AUTOMATIC ANTENNA TUNER
- ■ AT-230 ANTENNA TUNER
- ■ AT-130 ANTENNA TUNER
- ■ MC-85 MICROPHONE (8-pin)
- ■ MC-80 MICROPHONE (8-pin)
- ■ MC-60A MICROPHONE (8-pin)
- ■ MC-55 MOBILE MICROPHONE (8-pin)
- ■ MC-42S UP/DOWN HAND MICROPHONE
- ■ LF-30A LOW PASS FILTER
- ■ MB-430 MOBILE MOUNT
- ■ PG-2C DC POWER CABLE
- ■ SP-41 COMPACT MOBILE SPEAKER (4 ohms)
- ■ TL-922A/TL-922 HF LINEAR AMPLIFIER
- ■ MA-5 5 BAND HELICAL TYPE HF MOBILE ANTENNA
- ■ VP-1 BUMPER MOUNT FOR MA-5
- ■ SP-430 EXTERNAL SPEAKER
- ■ SP-50 MOBILE SPEAKER (8 ohms)
- ■ SM-220 STATION MONITOR
- ■ PC-1 A PHONE PATCH
- ■ TU-8 SUBAUDIBLE TONE UNIT
- ■ IF-232C INTERFACE
- ■ IC-10 INTERFACE 1C KIT
- ■ SW-2000 SWR/POWER METER
- ■ SW-200A SWR/POWER METER
- ■ HS-7 MICRO HEADPHONES (16 OHMS)
- ■ HS-6 COMMUNICATIONS HEADPHONES (12.5 OHMS)
- ■ HS-5 COMMUNICATIONS HEADPHONES (8 OHMS)
- COMMUNICATIONS HEADPHONES (8
- ■ SW-100A SWR/POWER METER
- 8. SCHEMATIC DIAGRAM
- 9. SPECIFICATIONS AND ACCESSORIES
- 10. REFERENCE