Kenwood TM-451A User Manual
Page 59
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting a Tone Frequency
Often a Tone frequency is required to access
repeaters. For example, 88.5 Hz may be needed in
the U.S.A. or Canada, and 1750 Hz is used in Europe.
The Tone frequencies listed below can be selected.
No.
Freq
(Hz)
No.
Freq
(Hz)
No.
Freq
(Hz)
01
67.0
14
107.2
27
167.9
02
71.9
15
110.9
28
173.8
03
74.4
16
114.8
29
179.9
04
77.0
17
118.8
30
186.2
05
79.7
18
123.0
31
192.8
06
82.5
19
127.3
32
203.5
07
85.4
20
131.8
33
210.7
08
88.5
21
136.5
34
218.1
09
91.5
22
141.3
35
225.7
10
94.8
23
146.2
36
233.6
11
97.4
24
151.4
37
241.8
12
100.0
25
156.7
38
250.3
13
103.5
26
162.2
(39)^
(1750)
The following procedure allows you to select any of
the available tones.
1 Press [F], [TONE/CTCSS].
• "TONE" blinks and the current Tone frequency
appears.
O
Or
O Ctb
S«RF 1
3 S 7
• OVER
.? 10
\ \ \ I /
-TONE
/ / n ^
2 Turn the Tuning control, or press microphone
[UP]/[DWN], to select a Tone frequency.
3 Press any button to store the frequency and return
to the previous mode.
^TM-25lEn'M-451E only
52