Kenwood TM-451A User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Changes In Displayed Frequencies
Changing between step sizes may result in a change
of the displayed frequency. When a change occurs,
and by how much, is shown in the accompanying
charts. This change also affects upper and lower
frequency limits selected for the Programmable Band
Scan function {page 59} and the transmit offset
selection in Menu A (page 23}.
For example, assume 144.995 MHz is displayed with a
20 kHz step size selected. Changing to a 25 kHz step
size alters the displayed frequency to 144.975 MHz.
5, 10, 15 or 20 kHz 12.5 or 25 kHz
Step Size Step Size
Displayed Frequency
(10 kHz/1 kHz)
Displayed Frequency
(10 kHz/1 kHz)
00, 05, 10, 15
00
20, 25, 30, 35
25
40, 45, 50, 55
50
60, 65, 70, 75, 80, 85, 90, 95
75
12.5 or 25 kHz ^ 5, 10, 15 or 20 kHz
Step Size Step Size
Displayed Frequency
(10 kHz/ 1 kHz/500 Hz)
Displayed Frequency
(10 kHz/1 kHz)
00
00
12.5
10
25
20
37.5
30
50
50
62.5
60
75
70
87.5
80
36