Kenwood TM-451A User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• It is possible that a memory channel may be
recalled and data such as Transmit Offset, Tone,
etc. are changed but not stored. If after the Call
channel is used you select the previous memory
channel, you will find the temporarily changed data
is gone, and only the data actually stored in the
memory channel will be recalled.
The Call channel defaults are as follows:
Version
Default (MHz)
TM-251
TM-451
Canada
U.S.A.
144.000
440.000
Europe
General
144.000
430.000
The contents of the Call channel cannot be deleted;
however, you can overwrite old data with new data as
described to the right.
Changing Call Channel Contents (Simplex)
1
1 Select the desired frequency and associated data
(Tone, CTCSS, DTSS, etc.) using VFO mode or
Memory Recall.
2
Press
[F]
to select Memory Storage.
• "F" and a memory channel number appear.
3 Press microphone [CALL].
The selected frequency and associated data are
stored in the Call channel. A transmit frequen(|
from a split memory channel is not stored.
The previous mode is restored.
44