Kenwood TM-451A User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
In Receive, acts as an S-meter to indicate the signal
strength of received signals. In Transmit, acts as an RF
power meter to indicate the relative transmit output
power {page 37}. Full scale represents High transmit
power.
Indicates the transceiver is in Transmit mode with a
transmit frequency that is within the transmit band.
:0 O ':
Displays the currently selected memory channel number
{page 41} or Menu B number {page 24}. The dots
beside the memory channel numbers are used only by
the ME-1 Expansion Unit. The right dot appears when
the 100s digit of the channel number is 1 (memory
channels 100-199). The left dot appears when the 100s
digit of the channel number is 2 (memory channel 200).
Indicates the Time-out Timer is ON {page 38}. Blinks
while accessing Menu A, Time-Out Timer {page 23}.
® STEP
Blinks while accessing Menu A, Frequency Step
{page 23}.
@ BEEP
Blinks while accessing Menu A, Confirmation Beep
{page 23}.
Acts as a Sub-display to show receive frequency. Tone
frequency, etc.
20