Kenwood TM-451A - Manual (Page 78)

REMOTE FUNCTIONS USING TH-7 KEYPAD DIRECT ENTRY
The transceiver can be controlled with the TH-7 simply
by connecting the cable supplied with the TH-7 between
the transceivers. The TH-7 is also useful as a speaker-
microphone for the transceiver. See the TH-7 instruction
manual for details. The Remote Control settings in
Menu B, No. 50 do not affect operation of the TH-7.
You can assign the functions of the keys on the
transceiver to the PF (Programmable Function) keys on
the TH-7.
You can also assign the following key functions;
• Functions of keys, other than [F], [PWR] and the
Tuning control.
• Functions initiated by pressing [F], [KEY].
• Functions initiated by pressing [F] + [KEY].
You cannot assign the following key functions:
• Functions initiated by pressing [KEY] (1 s).
• Functions initiated by pressing [KEY]+ POWER ON.
• Microphone key functions
When using a TH-7 for Remote Control, switch ON the
Microphone Connector Receive Audio (RD output)
function. This function is controlled via Menu B, No. 58.
The default is ON. The DTMF dialer cannot be used
from a TH-7.
The MC-45DM/DME numeric keys can be used to enter
either frequencies or memory channel numbers directly.
For this. Menu B, No. 50 must be set to ON. The key
that instructs the transceiver to prepare for direct entry
is [A].
• Menu B, No. 50 set to ON -^[A] functions as the
ENTER key.
■ Frequency Entry
Entering the desired frequency directly via the keypad
can be the fastest way of selecting a different
frequency especially when a small frequency step has
been selected. If the new frequency is hundreds of
kHz or more from the current frequency, and you
don’t have the new frequency stored in any memory
channels, direct entry may be the quickest way to
select your frequency.
1 Press [VFO] to select VFO mode.
2 Press [A].
♦ Microphone [A] is the ENTER key while Menu B,
No. 50 is ON.
• " -" indicators appear. The transceiver is ready
to receive frequency digits from the microphone.
71