Remote functions using mc-45dm/dme – Kenwood TM-451A User Manual

Page 75

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Press

[REV] + POWER ON

to enter Menu B.

2 Select Menu No. 50 {page 24}.

• The current Remote Control status appears.

u * f

I « T • oven

t t j i j O C >■*

I > tJt.m

C f *

3 Select a status.

• See chart above.

• Default: OFF

4 Exit Menu B.

Note: Remote Control cannot be used if Full Duplex or External

Control via a TH-7 is being used.

REMOTE FUNCTIONS USING
MC-45DM/DME

When your transceiver is configured for Front Panel

Remote Control, the keypad can be used to control the

functions as shown in the accompanying diagram.

The keys on the microphone keypad have duplicate
functions of the equivalent buttons on the Front Panel of
the transceiver.

Note:

► To activate the functions shown in the upper third of each

square in the diagram, press [D] first.

► When VOLUME or SQUELCH are ON, vary the volume and

squelch tiireshold by pressing f * ; and [#].

► Both VOLUME and SOUELCH cannot be activated at the same

time. Only one of the 2 functions can be ON at any time.

This manual is related to the following products: