Changing the alarm tone – Kenwood TM-451A User Manual
Page 94
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CHANGING THE ALARM TONE
Depending on where your station is installed and the
ambient noise at your station location, you may want to
change the default alarm signal that sounds when Tone
Alert detects an incoming call. You have a choice of 3
alarm signals that may be selected as follows,
1 Press [F] (1 s) to enter Menu A.
2 Select "Bell" {page 22}.
• "Bell" starts blinking and the current alarm
selection appears.
1 Ì Ju
O C L I ' / ' I ' N
1 » • 7 • OVEM
3 Select an alarm signal.
• B e l l : 3 telephone-style rings
• Bel 2: 4 high-pitched double tones
• Bel 3: musical tune
• Default: Bel 1
4 Exit Menu A.
87