I‘-i xo li li – Kenwood TM-451A User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3 Turn the Tuning control, or press microphone [UP]
or [DWN], to select the desired memory channel.
4 Press [MR].
The selected frequency and associated data are
stored in the memory channel. A transmit
frequency from a split memory channel or split
Call channel is not stored.
• If the memory channel selected in the previous
step already contained data, the new data
overwrites the previous data.
• The previous mode is restored.
Split Memory Channels
1 Select the desired receive frequency and
associated data (Tone, CTCSS, DTSS, etc.) using
VFO mode. Memory Recall or the Call channel.
Press [F] to select Memory Storage.
♦ "F" and a memory channel number appear.
Turn the Tuning control, or press microphone [UP]
or [DWN], to select the desired memory channel.
Press [MR](1 s).
• ” - +" appears.
k
J O
I‘-I XO LI LI
\ г %
1 9 oven
Turn the Tuning control, or press microphone [UP]
or [DWN], to select the desired transmit frequency
Press [MR].
• The selected transmit frequency is stored in the
memory channel, and the previous mode is
restored.
Associated data selected in Step 1 such as Tom
status/frequency, the frequency step, and DTSS
status/code are not altered by this step.
However, Transmit Offset status and Reverse
status are erased.
40