Frames with complex shapes, Frames with complex shapes -5 – Brother CM-2000 User Manual
Page 97
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Frame and Line Drawing
Notes!
1. The above examples show only one way to draw frames and tabular grids. If you find
it more convenient, you can move the carriage to the right first and define the vertical
lines, before moving the carriage down and defining the horizontal lines.
2. The maximum number of horizontal lines in a grid is limited to 70. If you try to set more
than this, the beeper will sound,
3. The maximum number of vertical lines in a grid is limited to 30. if you try to set more
than this, the beeper will sound.
4. You must use daisywheels with the vertical bar(|) symbol forframing, otheoA^ise vertical
lines will be printed as periods.
5. You must use keyboard 2and an International daisywheel, orkeyboard 3 and asymbol
daisy wheel, if you want to use the double ledger line
(=z)
for horizontal lines.
6. Framing only works when the default keyboard is selected for keyboard I, If you have
selected aforeign language keyboard for Keyboard I usingSET UP, framingwill network
at all.
Frames With Complex Shapes
You may want to drawframes whose shape is not rectangular, or grids where the horizontal
and vertical lines do not extend all the wayto the edges. For example, you may want atable
to have a rectangular box the full width of the table across the top, Lo accommodate the
title.
You can do this by building up the frame as a combination of several smaller frames.