Manual correction, Making corrections -1 – Brother CM-2000 User Manual
Page 87
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Making Corrections
Manual Correction
You can only perform automatic correction on the current typing line and the previous line.
Manual correction may be performed at any place on the page, as follows;
I. Move the carriage to the character to be corrected using [INDEX], [R INDEX],
[SPACEBAR], [BKSP] —> or — as necessary,
tssil.S'ËplpeEffi;iE;Ylly ■ ;
^
2. Hold down [CODE] and press [CORRECT], Then press the key for the incorrect
character.
That character will be erased and the carriage will remain in that position for you to type
in a new character, or move on, as necessary.
3. Type in the correct character.
This manual is related to the following products: