Prbbb k, Item -1s <0::4s> left, Iirluui::. ur – Brother CM-2000 User Manual
Page 172: Ii em 1 nr, Ine s dptfis i, Nblk r pnr
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Form Typing
If there are existing form files on the disk, they will be displayed with the extension
.FTP.
You can scroll the display to show other files by using the cursor keys.
3.
To create a new fonm, position the cursor on
^NEWFILE
and press
[RETURN].
The following message will be displayed:
•¿j 1
NbLK r PNR
l
R
h
ND
PRbbb K
i N
«
4.
Insert a blank form into the typewriter, and press
[RETURN].
The following message
will be displayed;
-iirlUUi::. UR
k
R 1 ftUE fiND PFiEbb R i N i
ITEM -1S
<0::4S> LEFT
5. Using
[BKSP],
[INDEX], [R INDEX]
(with
[CODE]
for micro adjustment)
and
[SPACE],
as required, position the carrier where you want to type the first item
on the form.
Note!
Don't try to use the [RETURN] key to move the carrier, as this is used to confirm that you
have finished adjusting the position.
You can choose the alignment of the text as follows;
[CODE]
+
[T SET]
- Left-aligned on a tab at the selected position. This is the default.
[CODE] + [DT SET]
- Aligned on a decimal tab at the selected position,
[CODE] + [CTR]
- Centred about the selected position.
[CODE] + [RMF]
- Right aligned to a tab at the cument position.
[CODE] + [S CODE]
- Stop code.
You can also press the
[MENU]
key to access the
POSITION SET
menu for these items.
After selecting the print position and alignment for the first item, press
[RETURN].
The following message will be displayed. This is the fill-in data screen:
--------^-------
Ii EM 1 Nr
---------------- -----------------------------------------p,
inE s
DPTfis i