Brother CM-2000 User Manual
Page 95
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Frame and Line Drawing
Drawing A Rectangular Frame
Drawing a simple frame is almost as easy as drawing lines. All you have to do is tell your
typewriter where the top-left and bottom right corners of the frame are, and it will do the
rest,
1. Begin in the same way as for drawing a line, by moving the carriage to the point where
you want the top left comer of the frame (A), and pressing the [FRAME] key.
As with drawing a horizontal line, if you want the top line of the frame to be a double
line, press [=].
2. Now move the carriage down and to the right, to the point where you wantthe bottom
right comer of the frame (B), In the example, the carriage is shown as moving down
first, then to the right, but in fact you can move the carriage down and right in any
sequence of steps.
If you want the bottom line of the frame to be a double line, press [=].
3. Press the [FRAME] key, followed by the [RETURN] key, as before. The frame will be
printed, and the carriage will i-etum to the top left-hand corner of the frame.
[ F R A M E ] ^
( O P T I O N A L )
— > - > = ( O P T I O N A L )
[FRAME]