Vertical line drawing, Horizontal line drawing -1 – Brother CM-2000 User Manual
Page 94
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Frame and Line Drawing
Note;
You can draw a double horizontal line if you have keyboard 2 selected and an International
daisy wheel fitted, which has the ledger line symbol (=).
You can also draw double lines if you have keyboard 3 selected and a Symbol daisy wheel
fitted.
Immediately after pressing the [FRAME] key for the first time, press [=] before moving
the carriage to the right When you press the [FRAME] key again, followed by the
[RETURN] key, the line will be printed double.
Vertical Line Drawing
To draw a vertical line:
2
.
Position the carriage where you want the top of the line to start (A), using the above
keys as required.
Press the [FRAME] key. The message -:SFRflriIN8 will appear in the display.
3.
Move the carriage to the point where you want the bottom of the line (B), using
[INDEX], [R INDEX], [CODE] + [INDEX], [CODE] + [R INDEX], as required, to
position it precisely.
4, Press the [FRAME] key again, then the [RETURN] key, as before. The line will be printed,
and the carriage will then return to its original position.
[ F R A M E ]
г
г
[ F R A M E ]
В