Brother CM-2000 User Manual
Page 76
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Text Attributes
Notes!
I. When typing on the display, the shape of the cursor changes to B for superscript and
■ for subscript. Superscript and subscript text already typed are indicated by the
subscript or superscript marker alternating with the text.
2. In
NORMAL
and
AUTO
typing modes you can have two levels of subscript or
superscript by pressing
[CODE]
+ [.] or
[CODE]
+ [,] twice.
You cannot do this in the display typing modes, since only one level of subscript can be
shown on the display.
3.
Subscript and superscript text can also be bold, underlined and/or expanded.
4.
The index and reverse index keys
[R INDEX]
or
[INDEX]
are not normally used for
subscript and superscript, since holding them down can move the paper continuously.
However, if you want the displacement of subscript or superscript characters to be
less than 1 / 1 2 inch, use them with the
[CODE]
key
([CODE] + [R INDEX]
or
[CODE] + [INDEX])
and the vertical movement of the carrier is only 1 /48 inch. This
does not work when typing on the display.
5.
If use of the
[R INDEX]
or
[INDEX]
keys moves the platen up or down by more than
1/4 inch, the line comection memory is cleared, since the typewriter cannot return the
paper accurately back to its original position for automatic correction.