Forriht-1 ®^n0e 2sbblect, Set neiii, Shd hrrgins shd press rim pitch" l"sp=;k»x – Brother CM-2000 User Manual
Page 113
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Forrnatting Your Document
When you first select the WP mode, the selected format will be the one that you last used.
If you wish to choose a different format, change the format memory, or delete a format
marker, proceed as follows:
1. First make sure that the cursor is positioned on the first character of the paragraph
where you wish to make the format change. If you want to change or delete an existing
format, there should be a format marker on this line.
2. Hold down the [ALT] key and press the [FORMAT] key.
The following menu will appear.
FORriHT-1
®^N0E 2sbbLECT
This menu gives you the option of changing the currently selected format, choosing a
different format, or deleting the format.
Changing The Format
To change the current format;
I. Press the [ I ] key, and the following message will appear
^SET NEiii
ims
SHD hRRGINS SHD PRESS RIM
PITCH" L"SP=;K»X
justs
off
You can set margins and tabs in exactly the same way as in the typewriter mode, by moving
the carriage with [SPACE] and [BKSP] keys and using the [L MAR] ,[R MAR], [M REL],
IT SET], and [DT SET] keys.
Similarly, you can set the typing pitch, line spacing, hot zone and justification, using [CODE]
plus the appropriate function key.
When you have finished changing the format, press the [RETURN] key, and the display
will return to the WP editing screen, ifthere was an existing format marker at the beginning
of the paragraph, its contents will have been changed, If there was no format marker, a
new one will be inserted.