Brother CM-2000 - Manual (Page 43)

Basic Typing
The left and right margins are factory set to 10 and 75, so this number will be 65 if the
machine has not been used before. If the machine has been used before and the margins
have been changed, this number may be different,
If the machine has been used before, you may see the display "RUT” on the top line of
the display. Alternatively, or “..TST" may appear in this position, in which case the
bottom line of the display will be blank. These display messages have to do with the four
operating modes of the typewriter, which will be discussed later.
Moving Around The Page
Your typewriter has keys that let you move the carriage accurately to any part of the page
and back to your original typing position, without having to make any time-consuming
manual adjustments of the platen.
Carrier Return
The [RETURN] key advances the paper by one line, depending on the line space setting,
and returns the print carriage to the left margin.
Tab Key TAB
FIND
The tab key moves the carriage to the right by one tab position each time it is pressed,
the distance depending on what tabs have been set
Index and Reverse Index R INDEX
MICRO
The index and reverse index keys are used for vertical adjustment of the paper, and for
shifting the paper up and down by 1/12 inch fortyping subscripts and superscripts.
The [INDEX] key moves the paper up by 1/12 inch (moves down the page) each time
it is pressed.
The [R INDEX] key moves the paper down by 1/12 inch (moves up the page) each time
it is pressed.
If [INDEX] or [R INDEX] are held down for more than 0.5 seconds, the paper will move
continuously until the key is released.