Automatic paper insertion – Brother CM-2000 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Up Your Typewriter
Automatic Paper Insertion
Inserting a sheet of paper into a typewriter has never been simpler just three easy steps
and you’re off! Most types of smootl i finish paper can be used with your typewriter. Rag
content and other types of rough paper, however, are not recommended.
First, ensure that the power switch is
ON,
and that the
PAPER RELEASE LEVER
is set to
the back position.
Place the paper guide in the desired position, then, holdingthe sheet as straight as possible.
Now press
[P INS].
The carrier will first move to the left end of the platen and then back
to the center of the margin scale, the paper bail will lift, and the platen will rotate to feed
in the sheet of oaoer automatically.