Brother MFC-370MC - Manual (Page 98)

Dialing Does Not Work
Check for a dial tone.
Change TONE/PULSE setting (see “Fax Settings”).
Check all line cord connections, and make sure the curled handset cord is not in
the EXT jack.
Check power cord connection.
Send a manual fax (press ¡Speaker Phone j or lift handset), and wait to hear fax
receiving tones before pressing
[Stohl.
Enabilng/Disabllng Anti-Curl Check Sheet (ACS)
Although the factory setting of Anti-Curl Check Sheet feature is OFF, you can
check the status of your fax machine’s Anti-Curl (ACS) feature by printing an
Anti-Curl Check Sheet.
Press Q] and [3 at the same time to print an ACS Check Sheet.
Press Q] and [|] at the same time to discontinue printing ACS Check Sheet.
Fax Machine Does Not Answer When Called
Make sure the fax machine is not in MANUAL mode.
Make sure it is in the correct receiving mode for your setup (either FAX ONLY, F/T
or TAD). Check for dial tone. If possible, call your fax machine to hear if it chirps.
No Dial Tone on the Handset
Press
[Speaker Phone
[. If you hear no dial tone, check telephone line cord connec­
tions at the fax machine and wall jack.
Poor Transmitting Quality
Tr\' changing your resolution to FINE or SUPERFINE (see “Sending Faxes”).
Tr)' cleaning the white pressure bar of the scanner and the glass under the bar
(see p. 86).
Vertical Black Lines When Receiving
The sender's scanner may be dirt)'. Ask the sender to make a copy to see if the
problem is with the sending machine.