Brother MFC-370MC - Manual (Page 39)

iifi! silH&iilB
See
Speed Dial
p. 20
4
when you hear the fax tone, press [^.
5
If you’re using the handset, hang up.
Automatic lyansmission
This is the easiest way to send a fax. IMPORTANT: Do not pick up the handset
or press ¡Speaker Phonej When you follow the steps below, you won’t hear any tones,
but the fax machine is sending them over the phone line.
M ” Insert the document face down in the feeder
i;i2 Enter the fax number from One Touch or Speed Dial or Tel-Index.
Press i^.
Manual and Automatic Fax Redial
If you ’re sending a fax majiually and the line is busy press |Redial/Pause| to retry
the number.
If you ’re sejiding a fax automatically, the machine will detect if the line is busy
and will automatically redial up to three times,
Receiving Faxes
See
Distinctive
Ringing
P^49
Select Answer Mode
Manual — You must answer all calls yourself. You can use this mode with
Distinctive Ringing.
Fax Only — The fax machine automatically answers even^ call as a fax call.
You cannot receive a voice call, but you can dial out and make a voice call.
F/T — The fax machine automatically answers every call. If the call is a fax, it
prints the fax. if the call is not a fax, it signals you with a double ring (ring-ring),
different from the phone company ringing, to alert you to pick up the call. It
plays your F/T OGM, in which you should instruct new callers how to send a fax.
If you select this setting, you’ll need to set the Ring Delay and F/T Ring Time
features (on the following pages). If you have extension phones on the same line
as the fax machine, set Ring Delay to 4,