Brother MFC-370MC - Manual (Page 58)

Press [Function), m, [7].
^ Press 0] or [3 to select the SET Mode.
6
Press 0.
Press The screen displays
[ D -''R bET i'lUDIE
Now, another person must call the fax number.
If you want to exit this programming, press Settings
remain unchanged.
When the fax machine rings, listen for tlie ring pattern, and make sure it’s
the one you want for the fax machine.
If it is, wait until the screen displays
[RICK UP I u
8
Lift the fax machine handset and press (St^. The screen displays
"REGISTERED. " (If the incorrect distinctive ringing number was called,
press to cancel.)
9 Hangup.
Once you’ve registered the Distinctive Ringing number in your fax machine, you
can turn this feature ON or OFF. To change the setting, follow steps 1 to 4 above,
selecting ON or OFF
Caller ID
See
Printing
Reports and
Lists
p. 77
The Caller ID feature of this machine lets you use the Caller ID subscriber service
offered by many local phone companies. This service provides you, by means of
the screen display, the name or telephone number of your caller as the line rings.
After two rings, the screen displays the telephone number of your caller (or name,
if available). Once you pick up the handset, the Caller ID information disappears
from the screen, but the call information remains stored in the Caller ID memoiy.
■ You will see the first l6 characters of the number or name.
■ OUT-OF-AREA display means call originates outside your Caller ID service area.
■ PRIVATE CALL display means the caller has intentionally blocked
transmission of information.
■ CALL PICKUP display remains on screen when no Caller ID information was
transmitted.
If both the name and number are received, the screen displays only the name.
You can print a list of Caller ID information received by your fax machine.