Brother MFC-370MC - Manual (Page 66)

See
Setting
Message
Center Mode
to ON
p34
See
Ring Delay
p. 34
Activating Message Center Mode
Press and hold (J) until the screen displays
r
~
M L- !1 U !" h! •
Setting Toll Saver
When you set the toll saver feature, the fax machine answer’s after 4 rings if yon
don 1. have messages, and after 2 rings if you do have messages. This way, when
you call the fax machine, if it rings 3 times, you know you have no messages, and
can hang up, avoiding any toll charge.
When Toll Saver is ON, it overrides your Ring Delay setting. Toll Saver must be
off for the machine to operate using your Ring Delay setting.
if* Press |Function|. [yi,[T],
Press 0] or [►] to select Toll Saver On or Toll Saver OFF.
¡3 Press ® when the screen displays your selection.
Pre^ to exit.
Message Indicator
Message light flashes when you have voice messages and/or faxes waiting for your
review. Once you listen to the message or print the fax, the light stops flashing.
The LCD screen displays the total number of voice (including memos) and/or fax
messages stored in Message Center memor)'.
C
I H R I L . B O H : 1
Playing Voice Messages and Memos
Follow the steps below to listen to voice messages and memos.
1
Press Ifl^. Adjust volume by press I Mode) or [Resolution!.
All messages and memos are played in the order they were recorded. The
display shows the number of the current message, and the total number of
messages.
If Caller ID information was received, the machine beeps during the message
and displays the Caller ID information for one second.
During playback, the screen displays the time and date the message was
recorded.