Brother MFC-370MC - Manual (Page 75)

Retrieving Memory Status List
and Fax Messages
You can retrieve the Memoiy Status List from a remote fax machine, and sec if
you have any fax messages stored in Message Center Memon^. You can then use
this list to retrieve specific fax messages.
1
2
3
4
5
6
7
8
9
Dial your fax machine telephone number.
When you hear the beep, immediately enter your Remote Access Code.
When you hear 2 short beeps, press [5 [3 OD-
When you hear the fax tones, press ¡^. (Don’t hang up if you also want to
retrieve messages; if you just want to check the list, hang up after you press
The remote fax machine prints the Memory Status List.
When you hear 2 beeps, press B [3 S], then enter the two-digit number of
the fax message you want to retrieve (for example, enter B B for message
2). To print all fax messages, press B B.
When you hear the fax tones, press (StS).
Hang up the phone you’re using.
The remote fax machine prints the fax messages.
Changing Fax Forwarding Number
■ 1 Dial your fax machine number,
2 When you hear the beep, immediately enter your Remote Access Code.
3
When you hear 2 short beeps, enter
B B B
•
4 Enter the new telephone number of the fax machine where you want yonr
fax messages foiwarded. You cannot use B) and [#) as dial numbers. Use
¡3 to enter a dialing pause between digits.
5 Press [MI after you enter the new number.
6
When you hear the tvn beeps, press B [3 B.
7 When you hear fax tones, press [^. Do not hang up the handset.
8
The remote fax machine prints the Memors' Status List so you can check that
the new fonvarding number is correct.
9
If the new number is correct, press
B B B
after the 2 beeps
— OR —
If the newmumber is incorrect, enter B B Œ) to return to Step 4.
to Hangup.