Brother MFC-370MC - Manual (Page 21)

iliiiilliiiillllilllliiiliilililiiiliililiiiliiililiiliiiiiiliiiiiil
iiiliilllllllllll
Do not connect a TAD elsewhere on the same phone line — your fax machine
and TAD will both tr)? to control the line.
See Message
Storage
p. 56
Connections
The external TAD must be plugged into the left side of the fax machine, into the
j ack iabeled EXT. Your fax machine cannot work properly if you plug the TAD into
a wall jack.
1
Plug the telephone line cord from the wail jack into the left side of the fax
machine, in the jack labeled LINE.
2
Plug the telephone line cord from your TAD into the left side of the fax
machine, in the jack labeled EXT. (Make sure this cord is connected to the
TAD at the TAD's telephone line jack, and not its telephone set jack.)
I3’ Press until the screen displays ^
:i4‘ Set Message Storage to VOICE: EXT mode.
Set your external TAD to 4 rings or less. (The fax machine’s Ring Delay
setting does not apply).
6 Set the TAD to answer calls,
7
Record the outgoing message (see below).