One touch dialing, Speed dialing, Hold – Brother MFC-370MC User Manual

Page 46: Pause

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ipiiiiiiiiiiiiii

See

One Touch

p. 18

If you have a bad telephone line connection, the other part}' might hear your

voice echoed during the call. Hang up and

try the call again.

One Touch Dialing

Pick up the handset — OR — Press [Speaker Phone |.

[2 When you hear a dial tone, press the One Touch key of the location you want

to call.

13 To hang up, replace the handset — OR — Press [Speoker Phone |

If you trv' to use a One Touch location with no number stored in it, you hear
a warning sound, and screen displays “NOT REGISTERED.” The display

returns to normal after 2 seconds.

See

Speed Dial

p. 21

Speed Dialing

1 Pick up the handset — OR — Press [Speaker Phone |.

2 When you hear a dial tone, press [Speed Diai|, then press the teo-digit

Speed Dial number,

3 To hang up, replace the handset — OR — Press [Speaker Phonej

Hold

Press [H

!^ to put a call on Hold.

You can put down the handset without disconnecting the call.

® Pick up the fax machine handset or pre^ [Speaker Photrel to release the call from

Hold. Picking up an extension handset

will not release the call from Hold.

Pause

Press jRedial/Pausej to insert a 3.5 second pause between numbers.