Copy functions – Brother MFC-370MC User Manual
Page 61
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

8
Wait 2 seconds, then press H. The screen prompts you to enter the fax
number you are polling.
C
IPRESS START KEyKI-
9 Enter the fax number (you can use One Touch or Speed Dial, or dial
manually).
10 Press fSt^. The fax machine makes the polling call at the time you entered.
Setting Up Polled Waiting with Quick-Scan
Before pressing
press
|Help/Q.Scpn|
so you can store your polled waiting
document in the memory. If you use
|Help/Q.Scan|
to place the Polled Waiting
documents into the memory, they will not be erased automatically after they are
polled. To erase them you must use the Cancel Job function. (See page 43.)
Copy Functions
See
Resolution
p. 30
Your fax machine cannot scan an)thing closer than one-eighth inch from the
edge of the paper. Set the resolution to S.FINE or PHOTO.
1 Place document face down in the feeder.
2 Press (You can press [C^ again for faster response — otherwise,
copying begins in about 5 seconds.)
Do not pull on the paper while copying is in progress.
Muitiple Copies
You can make muitiple copies using your fax machine, and. you can choose
whether the copies will be STACKED (all copies of page I, then all copies of
page 2, etc.) or SORTED (collated).
t
Place the document face down in the feeder, then press
(^.
. 2 Enter two digits for the number (up to 99) of copies you want. For example,
press ® [3] for three copies.
3 Press [Co^.
4 Use 0 or [E to select STACK or SORT.
5 Press [^. Make sure you frequently empty the receiving tray.