Erasing messages – Brother MFC-370MC User Manual
Page 68
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ITSliiBiilllillllSlIllBlilililllllii
::
; bvi V::;:; b/; b:;;;; ;.bbb: rb Y:? i
iilil
Erasing Messages
If you have more than one fax message, you cannot erase only one fax message
from memory. You must erase all of them (or none of them). If you choose to
erase all fax messages, the fax machine will print any previously unprinted fax
messages before erasing them from memory.
You can erase voice messages and memos individually, or all at once.
See
Voice Alarm
p. 63
To erase voice messages individually
1 Press After two seconds, the machine beeps and begins message
playback. Each message is preceded by one long beep, and followed by two
short beeps,
2 To erase a specific message, press I
Erase
| immediately after the two short
beeps, or while the message is playing. The screen prompts
[2Ef:(fiSE'YTi-YI:S;.l'' 1SG? )
( 1 ,,:№S 2 . NO:
1
)
3 Press (T) to erase the message
— OR —
Press
\J] to cancel.
4 Press H to exit.
To erase messages all at once
1 Press lErasej. The screen prompts you to choose what kind of messages you
want to erase.
1 C E ? ]
Vl SELECt V
2 Press Q] or [3 to select erasing all voice messages (VOICE), ail document
messages (FAX), or all messages — both voice and fax — (MSG).
3 Press 53-
4 Press U) to erase
— OR —
Press [2] to cancel.