Brother MFC-370MC - Manual (Page 28)

One Touch Dialing
Pick up the handset — OR — Press [Speaker Phone].
When you hear a dial tone, press the One Touch key of the location you
want to call,
If you try to use a One Touch location with no number stored in it, you hear a
warning sound, and the screen displays “NOT REGISTERED.” The display
returns to normal after 2 seconds.
storing Speed Dial Numbers_________________
You can store 50 Speed Dial number’s, which you dial by pressing only three keys.
Even if you lose electrical power, numbers stored in memon^ will not be lost.
■| Press iFutiitionj. [4], d]. The screen prompts you to enter a location,
I S P E E D - D I F I L ?
t _
I
2
Use the keypad to enter a 2-digit location (01 - 50). The screen displays your
entry, then prompts you to enter the number you’re storing.
A m B i
E N T ER SET
)
3
Enter the number (up to 20 digits),
4
Press
0.
The screen now prompts you to store a name with this number.
Use the keypad to enter the name. You can use the chart on page 17 to help
you enter letters — OR — Press S and go to Step 7 to store the number
without a name.
6 Press
7
The screen prompts you to select the type of number this is. Use
|T)
or
[0
to
select the type you want.
FAX a fas number
TEL a telephone (voice) number
F/T both a fax and telephone number
CHAIN a number (usually an access code) for chain dialing.
8 Press [§[1.
9 Return to Step 2 to store another Speed Dial number — OR — Press H
to exit.