Brother MFC-370MC - Manual (Page 29)

■HIH |j№|l|jli:il
SililiSiSMBilliiliR
Speed Dialing
It' Pick up the handset — OR — Press [Speaker Phone).
2
When you hear a dial tone, press [Speed Dial), then press the two-digit
Speed Dial number.
Changing One Touch and
Speed Dial Numbers
If you try to store a One Touch or Speed Dial number in a location where a
number is already stored, the screen displays the current naiue stored there, then
prompts you to either
1. CHANGE — OR -- 2. EXIT.
1
Press
Q]
to change the number stored, or press
[T)
to exit without making a
change.
2
If you want to erase the number, press H when the cursor is to the far left
of the digits.
3 If you want to change a digit, use [7] or 0 to position the cursor under the
digit you want to change, then press 1^.
4
Enter a new number, and press (S^.
5
Follow the directions from Step 5 in Storing One Touch Numbers or Storing
Speed Dial Numbers.
See
Storing One
Touch
Numbers
p. 18
and
Storing
Speed Dial
Numbers
p. 20
Setting Number Groups
for Broadcasting
Number Groups allow you to send the same fax message to miany fax numbers by
pressing only one One Touch key (Broadcasting). First, you'll need to store each
fax number as a One Touch or Speed Dial number. Then, you can combine
them into a Number Group. Each Number Group uses a One Touch key. Finally,
you can have up to 5 small Number Groups, or you can assign up to 54 numbers
to one large Group. You can use the same stored number in several groups.
You'll be able to give each Number Group a name up to 15 characters long.
1 Press I Function I. [4l, in. The screen displays
1 S h S E ^ ' U P ' S R O U I
d U C H