Brother MFC-370MC - Manual (Page 96)

I H R C H I H E E R R O R
and
^mss mop KE'-i^ j
Contact Brother Customer Service at
USA: 1-800-284-4329 (voice)
From within Canada: 1-800-853-6660 (voice) 8 AM-8 PM EST
From within Montreal: 1-514-685-6464 (voice)
I NO RESPOMSE---BUST~)
The number you called does not answer or is busy. You may also have reached a
number not connected to a fax. Check the number and call again.
I HOT . R E G I S T E R E D : ' : 1
You’ve tried accessing a One Touch or Speed Dial location Mth no number assigned
to it. See page 18 for information about storing One Touch or Speed Dial numbers.
IFBRER ROLL EriPI'^
The paper roll is emph; follow the instructions in Installation to replace the
paper roll.
F R U L T I
The recording head has overheated. Unplug the machine and wait 30 minutes
for it to cool,
( P R I N r E R J R H
The fax paper is jammed in the printer.
ft ' Unplug the power cord,
f2 Open the cover by lifting it at the grooves.
Pull the blue release lever on the print head unit and raise it.
' Use scissors to cut off the wrinkled portion of the paper
fS" Pull the wrinkled paper out from the front or rear side.
Plug in the power cord.
jj- Load the fax paper again, and push the blue release lever down. Close
the cover.