Brother MFC-370MC - Manual (Page 72)

Remote Retrieval
You can call your machine from any touch tone phone (or remote Group 3 fax
machine) and use a Remote Access Code and other button presses to retrieve voice
(and fax) messages. You can also program and change some settings for your
Message Center.
Changing Remote Access Code______________
Enter your Remote Access Code when the fax machine picks up your call, so you
can access features remotely. The access code is preset to 159*? but you can
change this,
1
2
Press iFunctionL [Ц, (T[.
Enter a three-digit number from 000 to 999? then You must end the
Remote Access Code with Do not use the same digits that appear in your
Remote Activation or Deactivation Code (page 48) , or Personal Mailbox Codes.
Wait 2 seconds.
4 Press to exit.
Using Remote Access Code
1 Dial your fax machine phone number from a touch tone phone.
2 When your fax machine answers and beeps, immediately enter your Remote
Access Code.
3 The fax machine signals the kinds of messages received:
1 long beep — Fax message(s)
2 long beeps — Yoice message (s)
3 long beeps — Fax and Voice message(s)
No beeps — no mess^es.
4 The fax machine then prompts you with two short beeps to enter a
command. If you wait longer than 30 seconds to enter a command, the
machine hangs up. If you enter an invalid command, the machine beeps
three times.
- Press (D [o] to reset the machine when you finish.
:0- Hangup.