Kenmore 385.160201 - Manual (Page 86)

(3) Mark for piacement of buttonhole
(4) Starting point
(g) Slider
(6) There should be no gap.
(T)
Spring holder
(8) Difference
[ 3 ] Draw both threads to the left under the foot.
Insert the garment under the foot, and lower the needle
to the starting point.
Then iower the automatic buttonhole foot.
Sew slowly and stop the machine at the starting point
when a buttonhole is completed.
Remove the fabric and place a pin just before the
bartack at each end, to prevent cutting bartadis. Cut the
opening with the buttonhole opener.
] Before you can sew another buttonhole, you must reset
the machine. Reset by shifting the stitch selector in
either direction, (
9 )or @, to the next setting. Then shift
the selector back to the buttonhole setting “ [|".
] When finished, push the buttonhole lever up as far as it
will go.
78