Presser foot types (continued) – Kenmore 385.160201 User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Presser Foot Types (continued)

• Satin stitch foot (Foot F)
Use this foot for satin stitch and outiining applique.
For: Darning

{page 46)

Satin stitch

(page 48)

Monograming

(page 50)

Applique

(page 50)

Sheil stitch

(page 60)

Twin needle stitches

(page 66)

Smocking

(page 70)

Foot F:
Prénsatelas F:
Pied F:

Overedge foot (Foot C)
This foot is specially constructed for stitching and/or

overcasting seams. The small brush and wire guides help
control the fabric, hold the raw edge in piace and keep it

from puckering, especially when sewing on knit fabrics.

For:Overcasting stitch (Page 54)

Overedge Stitch (Page 64)

Serging (page 72)

Buttonhole foot (B)

Use this foot for manual buttonhoiing.
It is marked to help you measure your buttonholes
accurately.
For: Manual buttonhole (page 84)

Quilter
The quilter will help to keep the stitching lines straight.

For: Straight stitching (page 40)

Foot C:
Prénsatelas C;
Pied C

Foot B:
Prénsatelas B:
Pied B

Quilter:
Acolchador:
Guide à matelasser: