Kenmore 385.160201 - Manual (Page 58)

Monogramming
(T) Stitch seiector:
(D Stitch width:
(3) Stitch length:
(j) Needle thread tension:
(5) Presser foot F:
(6) Pressure adjusting lever: 5
3
0.5 to 1
1 to 4
Satin stitch foot
1 or 2
3 -
WIDTH
LENGTH
(4)
W
-
1
!
li
Attach a piece of stabilizer on the wrong side {Bottom side)
of the fabric.
Draw letters on the fabric with tailor’s chalk. Form each
pattern with a satin stitch, adjusting the stitch width.
Applique
(T) Stitch seiector:
@ Stitch width:
(3) Stitch length:
(4) Needle thread tension:
® Presser foot F:
® Pressure adjusting lever: 5
2 to 6.5
0.5 to 1
2 to 6
Satin stitch foot
2
WIDTH ®
LENGTH
Baste applique pieces on the fabric, or fuse the applique
pieces with an iron-on fabric joiner. Stitch around the
applique, making sure the needle falls along the raw edge
of the applique.