Kenmore 385.160201 User Manual
Page 70
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
0 Stitch seiector:
11
(2) Stitch width:
5 to 6.5
(3) Stitch length:
0.5 to 2
(
4
) Needle thread tension:
3 to 8
(5) Presser foot A:
Zigzag foot
Fagoting Stitch
0 Paper or tear-away backing
@ 1/8”(0.3cm)
Use this stitch to join two pieces of fabric to create an open
work appearance, and add design interest. Fofd under
each fabric edge 1/2” (1.3 cm) and press. Pin the two
edges to paper or tear-away backing 1/8” (0.3 cm) apart.
Sew slowly, guiding the fabric so the needle catches the
folded edge on each side.
Two-point Shell Stitch
0
Stitch seiector
2
@ Stitch width:
3 to 6.5
0 Stitch length:
Red zone
0 Needle thread tension:
3 to 8
® Presser foot A:
Zigzag foot
This stitch is often used as a single overlook stitch.
^ WIDTH ®
LENGTH
Two-point Box Stitch
0
Stitch seiector
12
@ Stitch width:
3 to 6.5
@ Stitch length:
1 to 2
0
Needle thread tension:
3 to 8
® Presser foot A:
Zigzag foot
CD
I
0
-m
©
\m
6.5-
WIDTH
LENGTH
A 5___ 0)
WIDTH ^
LENGTH
This stitch is useful to join elastic fabrics.
62