beautypg.com

Zipper sewing (continued) – Kenmore 385.160201 User Manual

Page 52

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Zipper Sewing (Continued)

U](3) Wrong side (Bottom side) of fabric

(4)

Siider

(|) 2”(5.0 cm)

Stop just before the zipper foot reaches the slider on the

zipper tape, about 2”{5.0 cm) from the top of the zipper.

Lower the needie slightiy into the fabric, and then raise

the foot.

Open the zipper to move the siider(4) behind the zipper
foot.

Lower the foot, and stitch the remainder of the zipper,
making sure the fold is even.

Right side (Top side) of fabric

Close the zipper and spread the fabric flat with the right

side (Top side) of the fabric(6)facing up.

] Move the zipper foot to the left pin.

Guide the edge of the foot along the zipper teeth (T), and

stitch through the garment and zipper opening.

[6] Stop at about 2” (5.0 cm) from the top of the zipper.

Lower the needie slightly into the fabric, and then raise

the foot. Open the zipper to move the siider behind the
zipper foot. Lower the foot, and stitch the remainder of
the seam, making sure the fold is even.

44