ALTANA Auto-Chart - Manual (Page 41)

8. wave-scan link: Direct data transfer to Excel
Wave-scan link: 直接将数据传输到 Excel 表格
The auto-chart
®
software includes an Excel workbook for direct transfer of measurement data
from the instrument. This report is beneficial if only a few samples are measured and need to be
evaluated and documented.
auto-chart
® 含有个用于直接将数据从仪器下载数据的 Excel 工作簿。该表格对于只测量少量样品进
行评估和文件化非常方便。
The measurements can be performed with the instrument being in the:
- Programmed Mode (Organizer files are stored in the device) or in the
- Memory Mode (no Organizer files are stored)
仪器可使用以下模式进行测量：
-编程模式（保存在仪器中的编排档案）或
-存案模式（存储的非编排档案）
The workbook is located in the auto-chart main directory of your installation. Search in your file
manager for the file "wave-scan_link.xls and open this file. The report displays a spreadsheet with
the measured values and can show the Structure Spectrum, here an example with transfered
data:
该工作簿保存在您安装 auto-chart 软件的根目录里。用文件管理器找到“wave-scan_link.xls
”文件
并打开。报表只显示测量数据和结构谱线， 如下为传输数据的样件：