KEYENCE SL-R11E - Manual (Page 6)

English ENGLISH
5. Testing and Maintenance
• Always perform testing in accordance with the test procedures after maintenance, adjustment, or calibra-
tion of the target machine or the SL-R11E, and before the machine start-up.
• If the SL-C or SL-R11E does not operate properly when tested in accordance with the test procedures
established in this instruction manual, do not operate the machine.
• Periodically examine the machine to verify that all brakes, other stop mechanisms, and control devices
operate reliably and accurately in addition to checking for SL-C and SL-R11E.
• The responsible personnel must perform maintenance procedures as established in this instruction
manual at least once every six months to ensure safe device operation.
6. About Standards and Regulations
1) The SL-C and SL-R11E comply with the following UL (Underwriters Laboratories Inc.) Standards
and have received Canada-U.S.-Listing certification from UL.
• UL61496-1 (Type 4 ESPE - Electro-Sensitive Protective Equipment)
• UL61496-2 (Type 4 AOPD - Active Opto-Electronic Protective Device)
2) The SL-C and SL-R11E have not received the model certification examination in accordance with
Article 44-2 of the Japanese Industrial Safety and Health Law. Therefore, the SL-C Series and SL-
R11E cannot be used in Japan as a “Safety Devices for Presses and Shearing machines” as
established in Article 42 of that law.
3) The SL-C Series and SL-R11E have been designed in consideration of the following standards and
regulations. For details regarding the following standards, contact the third-party certification
organization, such as UL.
• OSHA 29 CFR 1910.212
• OSHA 29 CFR 1910.217
• ANSI B11.1 - B.11.19
• “Guidelines for Comprehensive Safety Standards of Machinery”, July 31, 2007, number 0731001 issued
by, Ministry of Health, Labor, and Welfare in Japan.
7. Accessories
Confirm that the package includes the main unit (SL-R11E) and following accessories.
Instruction Manual (this manual) 1 copy
v