KEYENCE SL-R11E - Manual (Page 17)

Chapter 2 Functions
2-5
2
ENGLISH
2-11 Mode Switch Settings
T R
Mode switch See Instruction Man
ual.
MODE SWITCH
MPCE
MONITOR
START
INTERLOCK
RESTART
INTERLOCK
1,5
2,6
3,7
4,8
POWER
OSSD-ON
OSSD-OFF
INTERLOCK
LOCKOUT
RESTART
TEST
MPCE
E-STOP1
E-STOP2
ON
12345678
Mode switch function and setting states
No. Mode Name When Enabled * When Disabled At Factory Shipment
1 MPCE monitor ON OFF OFF
2 Start interlock ON OFF OFF
3 Restart interlock ON OFF OFF
4 Not used – – –
5 MPCE monitor ON OFF OFF
6 Start interlock ON OFF OFF
7 Restart interlock ON OFF OFF
8 Not used – – –
(*) Both mode switches in the pair must be on.
Ex: The No.1 and No.5 mode switches are on when the MPCE monitor is enabled.
Mode switch setting method
1. Turn off the SL-R11E power.
2. Use a screwdriver to remove the switch cover screws, and then open the switch cover.
Mode switch setting 1 Mode switch setting 2
1
Loosen screw
2
Open lid