Carrier 50HCQ04---12 - Manual (Page 12)

12
C10817
Fig. 14 -- LON--OC and LON Network Wiring
Local Access
BACview 6 Handheld
The BACview 6 is a keypad/display interface used to
connect to the RTU--OPEN to access the control
information, read sensor values, and test the RTU. (See
Fig. 15.) This is an accessory interface that does not come
with the RTU--OPEN controller. You connect the
BACview 6 to the RTU--OPEN’s J12 local access port or
one of the communicating space sensor’s access port.
There are 2 password protected levels in the display (User
and Admin). The user password is defaulted to 0000, but
can be changed. The Admin password is 1111 and cannot
be changed. There is a 10 minute auto logout if a screen is
left idle. See Appendix A for navigation and screen
content.
Virtual BACview
Virtual BACview is a freeware computer program that
functions as the BACview 6 Handheld. The USB Link
interface (USB--L) is required to connect a computer to
the RTU--OPEN board. The link cable connects a USB
port to the J12 local access port. This program functions
and operates identical to the handheld.
Field Assistant
Field Assistant is a computer program included with the
purchase of the USB Link Tech Kit (USB-TKIT). This is
a field Tech Tool to set-up, service, or download the
RTU-OPEN controller. The link cable connects a USB
port to the J12 local access port. The menu structure is
similar to the BACview, but accessed and functions the
same as I-Vu.
C07170
Fig. 15 -- BACview 6 Handheld Connections