KEYENCE DL-DN1 - Manual (Page 68)

4-2
4
Sp
e
c
ific
a
tio
n
s
- DeviceNet Compatible Network Unit DL-DN1 User’s Manual (GT2) -
4-1
Specifications
*1 Power is supplied from both the sensor amplifier main unit the DL-DN1 is con-
nected to and the network power supply.
*2 "D-bus" is the name of KEYENCE's wiring-saving system for sensor amplifiers.
*3 Depends on the type of sensor amplifiers connected. (Up to 15 sensor units can
be connected to the GT2 series.)
Product name DeviceNet compatible communication unit
Model DL-DN1
Communication method DeviceNet compliant
DeviceNet specifi-
cations
Compliant functions
Remote I/O communication (polling)
Explicit messaging
Address setting 0 to 63 (PGM compatible)
Baud rate
(automatically switched) 500 kbps/250 kbps/125 kbps
Maximum cable
length
500 kbps 100 m for thick cable; 100 m for thin cable
250 kbps 250 m for thick cable; 100 m for thin cable
125 kbps 500 m for thick cable; 100 m for thin cable
Network power supply Power supply voltage: 11 to 25 VDC (supplied from DeviceNet
communication power supply)
Power consumption: 820 mW or lower (34 mA or lower when 24 V,
50 mA or lower when 12 V) *1
Sensor connection
specifications
Connectable sensors
Sensor amplifiers with D-bus support
*2
Number of connectable sensor
units
15 units max.
*3
Indicators
Network status indicator: 2-color (green/red) LED
Module status indicator: 2-color (green/red) LED
Sensor communication indicator: 2-color (green/red) LED
Power voltage
20 to 30 VDC, including ripple (P-P) 10%
(supplied from the connected sensor amplifiers)
Power consumption 660 mW or less (at 30 V, 22 mA max.)
Environmental
resistance
Operating ambient temperature -20 to +55 °C (no freezing)
Operating ambient humidity 35 to 85% RH (no condensation)
Vibration resistance 10 to 55 Hz, compound amplitude 1.5 mm, 2 hours each in X, Y, Z
directions
Pollution degree 2
Materials Main unit case and dust cover: Polycarbonate
DeviceNet connector: Polyamide (plug), PUT (socket)
Weight (including connectors) Approx. 80g