Checkline TI-MVX - Manual (Page 16)

3.7 SETUP – Menu
Open: Displays a list of factory and user defined setups
currently stored in memory. These setups can be
recalled and used at any time. Refer to page 74 for
further info.
Save: Provides the user with the ability to save a custom setup that has been
modified or created by the user. Refer to page 100 for further info.
Default Setup: Loads a basic default setup. Use only as a last resort when the
setups in the TI-MVX have been corrupted and a computer is not accessible.
Refer to page 77 for further info.
3.8 DATA – Menu
New: Allows the user the ability to create a new alpha
numeric grid with custom parameters, rows, and
columns depending on their application reporting
requirements. Refer to page64 for further info.
Edit: Gives the user the ability to change parameters of grid that have been pre-
viously saved. Note: Pre-defined coordinates cannot be changed once they have
been created. Refer to page 71 for further info.
Open: This function provides the user with the ability to recall grids that currently
exist in memory from a list of grids. Refer to page 72 for further info.
Delete One Grid: This function provides the user with the ability to delete one
individual grid from a list of multiple grids previously saved in memory. Refer to
page 70 for further info.
Delete All Grids: This function provides the user with the ability to delete all grids
currently stored in memory. Refer to page 70 for further info.
3.9 UTIL (utilities) – Menu
Auto Find: Automatically locates the detection point if
the measurement is out of the viewable display area.
Refer to page 59 for further info.
Scan Mode: This function enables a hi speed scan
mode that increases the overall sample rate from the
standard 4 measurements a second to 32 measurements a second. Refer to
page 59 for further info.
-16-
5) Press the ENTER key to activate the Alpha Edit
Box.
6) Use the UP, DOWN, LEFT, & RIGHT arrow keys
to highlight the appropriate alpha characters.
7) Press the ENTER key to select a character and
advance to the next field of the Grid Name.
8) Use the CLR key to backspace if necessary.
9) Repeat steps 6 -8 until the Grid Name is com-
pleted.
10) Press the OK key to save the Grid Name and
return to the Grid List Items menu, or ESC to can-
cel entering the Grid Name.
Creating a Grid Note
1) Use the UP and DOWN arrow keys to scroll
through the new Grid List Items until NOTE is
highlighted.
2) Press the ENTER key to activate the
Alpha Edit Box.
3) Use the UP, DOWN, LEFT, & RIGHT
arrow keys to highlight the appropriate alpha
characters.
4) Press the ENTER key to select a character
and advance to the next field of the Grid Note.
5) Use the CLR key to backspace if necessary.
6) Repeat steps 3 through 5 until the Grid Note is completed.
7) Press the OK key to save the Grid Note and return to the Grid List Items
menu, or ESC to cancel entering the Grid Note.
-65-