Checkline TI-MVX - Manual (Page 11)

B-SCAN DIGITS
In the upper left corner of each of the mode photos above, is the repeatability
indicator. The repeatability indicator is represented by six vertical bars and
represents how repeatable the measurements are. In regular measurement
mode, the TI-MVX makes 4 measurements a second. In scan mode, the TI-MVX
makes 32 measurements a second. When the TI-MVX is idle, only the left
vertical bar and the underline will be displayed. However, when the TI-MVX is
making a measurement, five or six of the bars should be displayed on the
repeatability indicator. If fewer than five bars are showing, the TI-MVX is having
difficulty achieving a stable measurement and the thickness value displayed is
potentially be unstable. Another thing to note is the vertical broken line in the RF
and RECTIFIED photos above. This line represents the actual point of detection.
The TI-MVX uses a zero crossing or flank detection method, and presents the
actual point of measurement on the display.
-11-
10.5 Deleting a grid
Deleting one grid
1) Press the MENU key once to activate the
menu items tab. Press the MENU key multi-
ple times to tab right and the ESC key multi-
ple times to tab left until the DATA menu is
highlighted and displaying the submenu
items.
2) Use the UP and DOWN arrow keys to scroll through the sub menu items until
DELETE ONE GRID is highlighted.
3) Press the ENTER key to display the Grid
List Box.
4) Use the UP and DOWN arrow keys to
scroll through the stored Grids until the
target Grid to delete is highlighted.
5) Press the OK key to delete the Grid.
6) Press the MEAS key to return to the
measurement screen.
Deleting All Grids
1) Press the MENU key once to activate the
menu items tab. Press the MENU key multi-
ple times to tab right and the ESC key mul-
tiple times to tab left until the DATA menu is
highlighted and displaying the
submenu items.
2) Use the UP and DOWN arrow keys to
scroll through the sub menu items until DELETE ALL GRIDS is highlighted.
3) Press the ENTER key to activate the confirmation screen.
4) Press the OK key to delete All Grids from memory, or the ESC key to abort.
5) Press the MEAS key to return to the measurement screen.
-70-