Yamaha PSR-6300 - Manual (Page 2)

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE RftRTS INSIDE.
REFER SERVICING TO OUALIFIED SERVICE PERSONNEL.
Explanation of Graphical Symbols
A
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the product.
PLEASE KEEP
THIS MANUAL
FOR FUTURE
REFERENCE!
IMPORTANT SAFETY AND INSTALLATION
INSTRUCTIONS
INFORMATION RELATING TO
POSSIBLE PERSONAL
INJURY, ELECTRIC SHOCK,
AND FIRE HAZARD
POSSIBILITIES HAS BEEN
INCLUDED IN THIS LIST.
WARNING
When using electronic products, basic
precautions should always be followed,
including the following:
I Read all Safety and Installation
■ Instructions and Explanation of
Graphic Symbols BEFORE using your
Yamaha electronic product. Check unit
weight specifications before you attempt
to move this instrument!
2 Main Power Supply Verification: Your
■ Yamaha electronic product has been
manufactured specifically for the main
supply voltage used in your area. If you
should move, or if any doubt exists, please
contact your dealer for instructions. The
main supply voltage required by your
electronic product is printed on the name
plate. For name plate location, see graphic
in on back cover of this mannal.
3 This product may be equipped with a
■ polarized line plug (one blade wider
than the other). If you are unable to insert
the plug into the outlet, contact an electri­
cian to have your obsolete outlet replaced.
Do NOT defeat the safety purpose of the
plug. Yamaha products not having
polarized plugs incorporate construction
methods and designs that do not require
line plug polarization.
4 WARNING—Do NOT place objects
■ on your electronic product’s power
cord or place the unit in a position where
anyone could trip over, walk over, or roll
anything over cords of any kind. Do NOT
allow your electronic product or its bench
to rest on or be installed over cords of any
type. Improper installations of this type
create the possibility of a hazard and/or
personal injury.
5 Environment: Your electronic product
. should be installed away from heat
sources such as a radiator, heat registers
and/or other products that produce heat.
Additionally, the unit should not be
located in a position that exposes the
cabinet to direct sunlight, or air currents
having high humidity or heat levels,
6 Your Yamaha electronic product
. should be placed so that its location
or position does not interfere with its
proper ventilation.
7 Some Yamaha electronic products
. may have benches that are either a
part of the product or supplied as an
optional accessory. Some of these
benches are designed to be dealer
assembled. Please make sure that the
bench Is stable before using it. The bench
supplied by Yamaha was designed for
seating only. No other uses are
recommended.
8 Some Yamaha electronic products
. can be made to operate with or
without the side panels or other
components that constitute a stand.
These products should be used only with
the components supplied or a cart or
stand that is recommended by the
manufacturer.
9 Do not operate for a long period of
. time at a high volume level or at a
level that is uncomfortable. If you
experience any hearing loss or ringing in
the ears, you should consult an
audiologist.
j Do not use your Yamaha electronic
I U- product near water or in wet
environments. For example, near a
swimming pool, spa or in a wet basement.
a j Care should be taken so that
II. objects do not fall, and liquids are
not spilled, into the enclosure through
openings.
j rt Your Yamaha electronic product
1
should be serviced by a qualified
service person when:
a. The power-supply cord or plug has been
damaged; or
b. Objects have fallen, or liquid has been
spilled into the product; or
c. The product has been exposed to rain;
or
d. The product does not operate, or
exhibits a marked change in performance;
or
e. The product has been dropped, or the
enclosure of the product has been
damaged.
4 Q When not in use, always turn your
I O.
Yamaha electronic product “OFF”.
The power-supply cord of the product
should be unplugged from the outlet when
it is to be left unused for a long period of
time. Notes: In this case, some units may
lose some user programmed data. Factory
programmed memories will not be
affected.
j M Do not attempt to sen^ice the
I product beyond that described in
the user-maintenance instructions. All
other sen/icing should be referred to
qualified sen/ice personnel.
.1 jr Electromagnetic Interference (RFI).
I O.
This series of Yamaha electronic
products utilizes digital (high frequency
pulse) technology that may adversely
affect Radio/TV reception or the polari­
zation of other devices that utilize digital
technology. Please read FCC Information
(inside back cover) for additional
information.