Canon C70 - Manual (Page 70)

2-32 Setting Up Your MultiPASS C70 Chapter 2
n
When you plug in the MultiPASS C70 for the first time, the cartridge
holder automatically moves to the centre of the unit so you can install
the BJ cartridge. If the cartridge holder is not in the centre, press the
C
button (inside the unit).
c
❏ Do not try to manually move or stop the cartridge holder as this
may damage the MultiPASS C70.
❏ Do not touch the round shaft, guide rail, or ribbon cable. Also, do
not touch the small circuit board on the cartridge holder. Touching
these parts may adversely affect operation of the unit and/or cause
print quality deterioration.
GUIDE RAIL
CIRCUIT BOARD
ROUND SHAFT
RIBBON CABLE