Canon C70 - Manual (Page 270)

11-6 Reports and Lists Chapter 11
Transmission (TX) Reports
For details on enabling or disabling printing of the transmission report,
refer to the
TX REPORT setting in the REPORT SETTINGS menu.
( 1 pp. 14-7, 14-8)
Error TX Report
The MultiPASS C70 is set to print a report if an error occurs during sending.
This is the default setting for the
TX REPORT setting. ( 1 TX REPORT ,
pp. 14-7, 14-8)
TX Report
You can change the TX REPORT setting to print a transmission (TX)
report for every document you send. ( 1 TX REPORT , pp. 14-7, 14-8)
***********************
***********************
***
*** TX REPORT
TRANSMISSION OK
TX/RX NO
0003*
CONNECTION TEL 1 432 2060
CONNECTION ID Canon OPTICS
ST. TIME 27/12 14:59
USAGE T 00’18
PGS. SENT 1
RESULT OK
27/12 2000 14:59 FAX 123 4567 CANON 001
*******************************
*******************************
***
*** ERROR TX REPORT
TX FUNCTION WAS NOT COMPLETED
TX/RX NO 0003*
CONNECTION TEL 1 432 2060
CONNECTION ID Canon OPTICS
ST. TIME 27/12 14:59
USAGE T 00’00
PGS. SENT 0
RESULT NG #018 BUSY/NO SIGNAL
27/12 2000 14:59 FAX 123 4567 CANON 001
* For colour transmissions, the message “:COLOR TX” is printed next to the
TX/RX NO.