Canon C70 - Manual (Page 215)

Chapter 8 Receiving Faxes 8-5
Receiving F
a
x
e
s
Receiving Faxes Automatically: FAX ONLY MODE
When the MultiPASS C70 is set up for a dedicated line, set FAX ONLY
MODE to automatically receive documents whenever a call comes over
the fax line.
Setting FAX ONLY MODE
Your MultiPASS C70 is factory-set to FAX ONLY MODE . If you have not
changed the receive mode to Fax/Tel Mode or NET SWITCH , simply
follow this procedure:
1. Press Receive Mode to select FAX ONLY MODE .
❏ After a few seconds, the LCD display changes to the following
display:
Ex:
If you have previously set FAX/TEL AUTO SW or NET SWITCH in the
RX MODE setting of the RX SETTINGS menu, you will have to change
the mode back to FAX ONLY MODE . Follow this procedure:
1. Press Function .
2. Press Data Registration .
3. Press Set .
USER SETTINGS
Set
DATA REGSTRATION
01
Data Registration
Function
15:00 FaxOnly
FAX ONLY MODE
Receive Mode